Drawworks For Sale

(5) 36 SHEAVES,

INGERSOLL-RAND HU5LR

NATIONAL 1320-UE

National 1320-UE Drumshaft Assembly Refurbishment Process includes : - Complete Disassembly - Sandblast all Components - Mag-Particel Inspection of all Load-Bearing Components - Dimensional Inspection of all Components - Reassembly with New Bearings, Clutch Linings & Rubber Components - Final Paint

NATIONAL 1320-UE

National 1320-UE Drawworks Refurbishment Process includes: - Complete Disassembly - Mag-Particle Inspection of all Load-Bearing Components - Dimensional & Condition Inspection of all Components - Reassembly with New Bearings, Seals & Hardware - Factory Acceptance Test - Final Paint ***REPRESENTATIVE PHOTO***

CONTINENTAL EMSCO

Continental Emsco C3-Type II Drawworks Refurbishment Process includes: - Complete Disassembly - Mag-Particle Inspection of all Load-Bearing Components - Dimensional & Condition Inspection of all Components - Reassembly with New Bearings, Seals & Hardware - Factory Acceptance Test - Final Paint

MID-CONTINENT U-1220

Mid-Continent U-1220 Drumshaft Assembly

OILWELL E-2000

Oilwell E-2000 Drumshaft Assembly Refurbishment Process includes : - Complete Disassembly - Sandblast all Components - Mag-Particel Inspection of all Load-Bearing Components - Dimensional Inspection of all Components - Reassembly with New Bearings, Clutch Linings & Rubber Components - Final Paint

CONTINENTAL EMSCO

Continental Emsco Type GBH Breakout Cathead Refurbishing Process includes : - Complete Disassembly - Sandblast - Mag-Particle-Inspection - Dimensional Inspection - Complete Necessary Repairs - Reassemble with New Bearings, Lining, Rubber Goods & Hardware - Final Paint ***REPRESENTATIVE PHOTO***

CONTINENTAL EMSCO

Continental Emsco Type GB Spinning Cathead Refurbishing Process includes : - Complete Disassembly - Sandblast - Mag-Particle-Inspection - Dimensional Inspection - Complete Necessary Repairs - Reassemble with New Bearings, Lining, Rubber Goods & Hardware - Final Paint ***REPRESENTATIVE PHOTO***

OILWORKS AIR HOIST

Oilworks Air Hoist and Winches Oil Works, Inc. offers full service on any brand or make of air hoist. Our company offers a complete line of parts and service for Ingersoll-Rand air winches and Manrider units. New and remanufactured units are available for exchange or outright sale. Models: 2500 lb.- 10,000 lb HU, HUL, HU40, HUL40, H5U, H5UL, K4, K4U, K4UL, K5, K5U, K5UL, K6, K6U, K6UL Units are available for: Drilling Rigs Floor and Subs Drill Line Spoolers Derrick / Mule Winch Mining Industry Manlifting Applications General Construction

OWI AC 2000

The OWI AC 2000 EH integrates some of the latest technology and safety features available today with the durability and familiarity of units that have been designed and built for years. Our goals were to design and build Drawworks that were efficient to operate and easy to maintain and service. A/C Gear Drive Drawworks. Maximum Hoisting Capacity 860,000 Lbs on 10 Lines. Drum Diameter 31”. Drum Length 54-1/4”. Single Speed Gear Box with 9.907 Ratio. Optional Two Speed Gear Box. External Lube System with Heat Exchanger and Filter. Heavy Duty Frame and Skid. A/C Drilling Motor with Drawworks Rating of 2700 HP. Spring Set, Pneumatic Release Parking Brake. Dynamic A/C Motor Braking.

OWI AC 1600

The OWI AC 1600 integrates some of the latest technology and safety features available today with the durability and familiarity of units that have been designed and built for years. Our goals were to design and build Drawworks that were efficient to operate and easy to maintain and service. Drawworks skid is welded structural steel frame, dimensions are 39’l x 14’w x 8’. Weight: Approximately 90,000 lbs. Drawworks skid is mounted. All housing and maintenance guards are included. Main drum with Lebus wire rope sleeve, left hand groove under wound left hand entry 31 ½” x 54-1/4” diameter drum. Lebus grooving for 1-3/8” drill line. Drawworks duty single speed transmission. Self contained oil cooling system for transmission with oil cooler and temperature sensors. Cobra head style makeup and breakout hydraulic catheads mounted on Drawworks skid. Drum shaft support bearing is forced grease lubricated. Controls for Drawworks located in the driller’s cabin. Spring set pneumatic release Wichita 336 Airmakk Park & E-stop brake. Brake control panel on Drawworks with manual brake release.

OWI 1500 EH

The OWI 1500 EH integrates some of the latest technology and safety features available today with the durability and familiarity of units that have been designed and built for years. Our goals were to design and build Drawworks that were efficient to operate and easy to maintain and service. 1500/2000 input horsepower 90,000 lb. single line pull. Drum shaft diameter 8in 6 speed transmission Large capacity bearing throughout Winches operated at console or by remote control with safety lockout EATON 236WCBD water cooled break. 32VC1000 low drum clutch 28VC650 high drum clutch 24E475 rotary clutch Rotary back brake optional Inertia brake Foster style Catheads Control cabinet uses standard valves

OWI 1000 MH

The OWI 1000 MH integrates some of the latest technology and safety features available today with the durability and familiarity of units that have been designed and built for years. Our goals were to design and build Drawworks that were efficient to operate and easy to maintain and service. Hydraulic Catheads controlled by Hawe joystick, adjustable at console Hydraulic winches controlled by Hawe joystick Large capacity bearings throughout Winches operated at console or by remote control with safety lockout Remote has E stop and keyed lockout E stop on panel

OWI 1000 M DRAWWORKS

The OWI 1000 M integrates some of the latest technology and safety features available today with the durability and familiarity of units that have been designed and built for years. Our goals were to design and build Drawworks that were efficient to operate and easy to maintain and service. 1000 input horsepower 52,000 lb. single line pull Drum shaft diameter 8 in. 6 Speed transmission Large capacity bearings throughout Straight roller bearings and ball thrust bearing in low floating sprocket EATON 236WCBD water cooled brake 32VC1000 low drum clutch 28VC650 high drum clutch 24E475 rotary clutch Rotary back brake optional Inertia brake Foster style Catheads Control cabinet uses standard valves

BAYLOR BRAKE 7838

Model 7838 Baylor Elmagco Eddy Current Brake. The unit has been rebuilt and is available from stock.

DRAWWORK OILWELL

Oilwell 760

DRAWWORKS

Mid Continent U-712-AE

LIEBHERR BOS

Liebherr BOS 400/6500 Offshore Pedestal Crane, 400 Te SWL w/28 m boom & Counter Weight. 200 Te SWL w/40 m boom. Suitable for subsea construction work. Very good condition.

NOV IDECO E-3000

Ideco Model E-3000 Drawworks, single drum, rated up to 4000 HP, current 3000 HP set up w/ 3 each GE752 Motors, (Elmagco 7838 Brake). Refurbished in 2007. DNV certified.